background image

7

PLANETA

PLANET

PLANET

1861

Heben ohne Grenzen

–   The personal who works with the hoist, shall not bear long open hair, loose suits or 

juwels including rings. That could effect danger of injuries or that something can be 

pulled into the hoist.

–   Safety tags, stickers and other attached instructions at the hoists like name plates 

are not allowed to be replaced, removed or overpainted. All written, printed or 

stamped letters and safety instructions have to be held in good readable condition. 

Use grease or other protection if necessary!

–  

Important:

 If this hoist or this trolley was made for manual powered operation, 

you are not allowed to power it by a motorized device without prior allowance of 

the manufacturer. For example: the use of an electric hand drilling machine is not 

allowed to be used at a reel chain wheel.

–   Here add company safety advises:

4. Operation

Test before use

–   Please check whether the supplied hoist is in accordance with your purchase order, 

check completeness and tightness of all bolts and nuts.

–   Make sure that there occured no damages during transportation.

–   Copy and write down the date from name plate into your operation manual after 

inspection of the hoist and trolley.

–   Take fully care that the maintenance and operation manual is in reach of the 

personel who works with the hoist or make sure that the supervisor has it at hand to 

instruct the personal.

–   Check or recalculate whether the supporting construction (beam, clamp etc) in 

which the trolley or hoist hangs is in full compliance with the necessary capacity.

–   If you are in doubt, please call for help of a construction engineer for statics.

–   Chain hoists hanging in a trolley or even incorporated in a trolley, are cranes. 

They have to comply with special standards and safety regulations (BGV D6 in 

Germany). They have to be checked by a “crane expert” prior use. We can help you 

with such an expert upon your request. Please do not hesitate to contact us under 

the phone number on page 1.

Содержание HD3N-EX





























Отзывы: