5
=>
6
=>
*
=>
{00
to
30}
=>
#
Enter minutes in two digits.
00 means no delay
01 means 1 minutes delay
30 means 30 minutes delay
11. Setting Siren Sounding Time/ Silent Alarm Model.
This function allows you to set the length of time your siren will sound; you have a range from
silent alarm (00)
up
to thirty (
30
) minutes.
The factory default setting is three (01) minutes.
With your system in
programming status
,
enter the number below into your keypad. In place of the {00 to 30}, enter the length of siren sounding time from
zero (
00
) to thirty (
30
) minutes.
5
=>
4
=>
*
=>
{00
to
30}
=>
#
Enter minutes in two digits.
00 means silent alarm
01 means 1 minutes sound
30 means 30 minutes sounds
12. Programming Stored Phone Numbers.
To program your dialer with the phone numbers you want called when the alarm is triggered (up to six numbers),
enter the number sequence below into your keypad. In place of the {enter phone number}, enter the phone number.
If your calling location requires a calling prefix (e.g. New York requires you to dial 1 first), enter the prefix along
with your phone number.
If you want to change any stored phone number, re-enter the sequence code for that number and enter the new
number; you do not have to delete the old number as the system will automatically replace it with the new number.