3. Activating Your Keychain Remote /Panic button.
With your system in
programming status
enter the number below. In word of the trigger
,
A.
Push any of the four buttons on your keychain remote. You will hear
double beeping
sounds indicating that your
keychain remote is now activated.
B.
Push buttons on your panic button. You will hear double beeping sounds indicating that your panic button is now
activated.
Study
=>
6
=>
4
=>
#
=>
trigger
The study switch on the
top of the keypad/dialer
unit;
A. Push any button on keychain.
B. Push button on panic button.
Activating the detectors
Our system supports 32 defense zones. This system is unique in letting you know exactly which sensor is setting off
the alarm. Each individual sensor (Motion detector, window/door sensor, smoking/gas detector, glass break detector)
has to be individually activated while unit is in “programming status”. Each sensor is programmed to have its own
numerical identity. Same types of sensors/detectors can share the same assigned numerical number. To perform this,
you first assign a two digit numbers to each sensor. Window/door sensors may be assigned any number between 09
and 64(notice: must 2 digits); motion detectors, smoke & gas detectors any number between 01 and 09(notice: must
2 digits). These are zone numbers. You may use the same assigned zone for up to 99 sensors.
When a sensor is
triggered the assigned zone number will light up on the LED screen of the keypad. It may be helpful for you to keep a list of the
areas corresponding to the assigned zones.
4. Activating Door/Window Sensors.
Each sensor needs to be numbered
For each door/window sensor, choose a number from
09 to 63
(notice: must 2 digits)
,
with your system in
programming status,
enter the number below into your keypad/controller. In the place of {09 to 63}, enter the
number you have chosen for the sensor. In place of trigger, you will need to physically trigger the door/window
sensor to activate it by bring the magnetic bar and the sensor together and then separating them. Activation will be
confirmed by a
double beeping
sound. Each door/window sensor has to be individually activated using this
procedure.
Study
=> {
09
to
63}
=>
#
=>
trigger
Trigger
Door/window sensor
(Separate sensor from
magnetic bar)
Enter the number for
selected this sensor from
09-63,
(must 2
digits)