Home arm function: A sensor programmed to the home arm function will not be operational when the
system is home armed, this function is usually programmed for the motion detector.
7
=>
2
=>
*
=>
{01
to
08}
=>3 =>
#
Enter sensor zoon
number between
01-08.
9. Setting the Exit Delay Time/ Arm Delay Model.
This function allows you to activate your system while providing you with time to exit your premises without
triggering the alarm system; you can adjust the delay time from zero (
00
) to thirty (
30
) minutes. With your system in
programming status
, enter the number sequence below, and where the {00 to 30} appears enter the delay time you
wish (up to 30 minutes).
The default factory setting for delay time is one minute.
5
=>
5
=>
*
=>
{00
to
30}
=>
#
Enter minutes in two digits.
00 means no delay
01 means 1 minute delay 30
means 30 minute delay
10. Setting the Entrance Delay Time/ Disarm Delay Model.
This function allows you time to enter your premises when your alarm system is armed without triggering the alarm
system. The entrance delay time can be set from zero (
00
) to thirty (
30
) minutes. With your system in
programming
status,
enter the number sequence below into your keypad. In place of the {00 to 30}, enter the delay time (up to 30
minutes).
The default factory setting for delay time is zero minute
.