- 28 -
Delete:
Select a filter profile from the table at the bottom of the list and click “Delete” to remove the
profile.
New:
Click “New” to erase all fields and enter new information
.
3.5.2 Virtual Server
This screen enables you to create a virtual server via the WRT-415. If the WRT-415 is set as a virtual
server, remote users requesting Web or FTP services through the WAN are directed to local servers in
the LAN. The WRT-415 redirects the request via the protocol and port numbers to the correct LAN server.
The Virtual Sever profiles are listed in the table at the bottom of the page.
Enable:
Click to enable or disable the virtual server.
Name:
Type a descriptive name for the virtual server.
Protocol:
Select the protocol (TCP or UDP) you want to use for the virtual server.
Private Port:
Type the port number of the computer on the LAN that is being used to act as a virtual
server.
Public Port:
Type the port number on the WAN that will be used to provide access to the virtual server.
LAN Server:
Type the LAN IP address that will be assigned to the virtual server.
Add:
Click to add the virtual server to the table at the bottom of the screen.
