- 32 -
IP Range End:
Type the end IP address that the rule is applied to.
Destination:
Defines the destination of the incoming packet that the rule is applied to.
Interface:
Select which interface (WAN or LAN) the rule is applied to.
IP Range Start:
Type the start IP address that the rule is applied to.
IP Range End:
Type the end IP address that the rule is applied to.
Protocol:
Select the protocol (TCP, UDP or ICMP) of the destination.
Port Range:
Select the port range.
Add:
Click to add the rule profile to the table at the bottom of the screen.
Update:
Click to update information for the rule if you have selected a list item and changed.
Delete:
Select a list item and click “Delete” to remove the item from the list.
New:
Click “New” to erase all fields and enter new information.
Priority Up:
Select a rule from the list and click “Priority Up” to increase the priority of the rule.
Priority Down:
Select a rule from the list and click “Priority Down” to decrease the priority of the rule.
Update Priority:
After increasing or decreasing the priority of a rule, click “Update Priority” to save the
changes.
3.6 System
3.6.1 Password
You can change the Administrator and User’s password in this screen. These passwords are used to gain
access to the router interface. When you login with user name “User”, you don’t have permission to
configure WRT-415.
