5.5 QoS
Quality of Service (QoS) refers to the capability of providing better service to selected network traffic. The
primary goal of QoS is to provide priority including dedicated bandwidth, controlled jitter and latency
(required by some real-time and interactive traffic), and improved loss characteristics. When using this
feature, it is important to make sure the rules are not conflicted with each other.
Parameters
Description
Enable QoS
Check this box to enable QoS function, unselect this box if you don’t want to
enforce QoS bandwidth limitations.
Total Download Bandwidth
You can set the limit of total download bandwidth in kbits. To disable
download bandwidth limitation.
Total Upload Bandwidth
You can set the limit of total upload bandwidth in kbits. To disable upload
bandwidth limitation.
Add
When you want to add a new QoS rule, press this button and refer to
instructions below to add a new QoS rule.
Edit
When you want to edit the existing QoS rule, press this button and refer to
instructions below to edit QoS rule.
Delete Selected
Select the QoS rule which you would like to delete, press this button to
delete.
Delete All
When you want to delete all the QoS rules, you just need to press this
button.
Move Up
Select a QoS rule and press this button to assign higher priority.
Remove Down
Select a QoS rule and press this button to assign lower priority.
Reset
Click “Reset” to clear your current selections.
49
