Associated Client
You may press “
Show Active Clients
” button to check the connected client
information. After the button pressed, you will see the dialog box as below.
You may press “
Refresh
” to get the new client table or “
Close
” to close this dialog
box.
MAC Address 1-4
If you want to bridge more than two wired Ethernet networks together with wireless
connection, you have to enter the MAC addresses of otherWNRT-626s that with
join the bridging work into the fields.
Set Security
IF you want to enable security to protect your wireless connection. Please press
“Set Security” button and refer to section 6.7 “Security setting for bridge mode” to
configure the detail settings.
**When you set security, you must enable the same security setting of two AP
router.
After configuration complete, please click “Apply”
button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press “Continue” for configure other
settings or “Apply” to restart WNRT-626 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
74
