Planet WNRT-627 Скачать руководство пользователя страница 48

Страница: 48 / 165

User’s Manual of WNRT-627

-48-

The page includes the following fields:

Object

Description

User Name/Password

Enter the User Name and Password provided by your ISP. These fields

are case-sensitive.

The Secondary Connection is disabled by

default, so there is PPPoE connection only.

This is recommended.

Disabled

Dynamic IP

You can check this radio button to use Dynamic

IP as the secondary connection to connect to

the local area network provided by ISP.

Secondary Connection

Static IP

You can check this radio button to use Static

IP as the secondary connection to connect to

the local area network provided by ISP.

In this mode, the Internet connection can be terminated

automatically after a specified inactivity period (

Max Idle Time

) and

re-established when you attempt to access the Internet again.

you want your Internet connection to keep active all the time,

please enter “0” in the

Max Idle Time

field. Otherwise, enter the

number of minutes you want to have elapsed before your Internet

access disconnects.

Connect on Demand

Connect Automatically

The connection can be re-established automatically when it was

down.

Time-based Connecting

The connection will only be established in the period from the start time

to the end time (both are in HH:MM format).



Note:

Only when you have configured the system time on

System Tools

-> Time

page can the

Time-based Connecting

function take

effect.

You can click the

Connect

Disconnect

button to

connect/disconnect immediately.

This mode also supports the

Max

Idle Time

function as

Connect on Demand

mode. The Internet

connection can be disconnected automatically after a specified

inactivity period and

re-established when you attempt to access the

Internet again.

Connect Manually

Table 5-4

Sometimes the connection cannot be terminated although you specify a time to
Max Idle Time, since some applications are visiting the Internet continually in the
background.

Содержание WNRT-627






































































































































































Результаты поиска

Содержание WNRT-627

Отзывы:

Похожие инструкции для WNRT-627

Бренды по названию

Популярные бренды

Planet WNRT-627, Руководство пользователя

Результаты поиска

Содержание WNRT-627

Отзывы:

Похожие инструкции для WNRT-627

Бренды по названию

Популярные бренды