Planet WAP-500N, Руководство пользователя

Страница: 43 / 78

User Manual of WAP-500N/WBS-500N
-42-
•
Subnet Mask Enter the device’s WAN IP subnet mask provided by ISP.
•
Default Gateway
Enter the device’s WAN Gateway IP provided by ISP.
•
PPTP Server
Enter the IP address of the PPTP server.
•
Username
Enter the username provided by ISP.
•
Password
Enter the password provided by ISP.
•
Connect on Demand
Select it to specify the maximum idle time. Internet connection will
disconnect when it reaches the maximum idle time, but it will
automatically connect when user tries to access the network.
•
Keep Alive
Select whether to keep the Internet connection always on, or enter a
redial period once the internet loses connection.
•
Accept Click Accept to apply the setting.
•
Cancel
Click Cancel to cancel the setting.
4.4.3 VPN Passthrough
VPN Passthrough allows a secure virtual private network (VPN) connection between two sites. Enabling the
options on this page opens a VPN port and enables connections to pass through the AP without interruption.
Go to the “Operation Mode” page to configure the device as “WISP” and then go to “Router VPN Pass
Through” to enable VPN passthrough you required.
Figure 4-20 VPN Passthrough
The page includes the following settings:
Object Description
•
PPTP Passthrough
Check this option to enable PPTP pass-through mode.
•
L2TP Passthrough Check this option to enable L2TP pass-through mode.
•
IPSec Passthrough Check this option to enable IPSec pass-through mode.
•
Accept Click Accept to apply the setting.