Planet WAP-500N, Руководство пользователя

Страница: 34 / 78

•
IP Address
The
The default is
•
IP Subnet Mask
The
•
Default Gateway Enter t
•
Primary DNS Enter the
•
Secondary DNS
Enter the
•
Use Link-Local Address Click to
•
IPv6 IP Address Enter the IPv6
•
IPv6 Subnet Prefix Length
Enter the
•
IPv6 Default Gateway
Enter t
•
IPv6 Primary DNS Enter the
•
IPv6 Secondary DNS
Enter the
•
Accept
Click
•
Cancel
Click
settings
4.3.2 Spanning Tree Settings
The Spanning Tree Protocol (STP) allows network to provide a redundant link in the event of a link failure. It is
advised to turn on this option for multi
Click “System Spanning Tree Settings
The page includes the following settings
User Manual of WAP
-33-
The LAN IP of the AP.
The default is 192.168.1.253. You can change it according to your need
The LAN subnet mask of the AP.
Enter the Gateway IP address of the AP.
Enter the primary DNS server of the AP.
Enter the secondary DNS server of the AP.
Click to enable a link-local address for the AP.
Enter the IPv6 LAN IP of the AP.
Enter the secondary DNS server of the AP.
Enter the IPv6 Gateway IP address of the AP.
Enter the IPv6 primary DNS server of the AP.
Enter the IPv6 secondary DNS server of the AP.
Click Accept to apply the new settings.
Click Cancel to cancel the unsaved changes and revert to the previous
settings.
Settings
allows network to provide a redundant link in the event of a link failure. It is
to turn on this option for multi-point bridge network to avoid network loop.
Spanning Tree Settings” to enable/disable Spanning Tree Settings.
Figure 4-13 Spanning Tree Settings
The page includes the following settings:
WAP-500N/WBS-500N
. You can change it according to your needs.
cancel the unsaved changes and revert to the previous
allows network to provide a redundant link in the event of a link failure. It is
to enable/disable Spanning Tree Settings.