Planet WAP-500N, Руководство пользователя

Страница: 18 / 78

2.3 Installing the AP
Please install the AP according to the following
hands dry.
Step 1. PoE and LAN port connection:
(1) Remove the bottom cover
(2) Connect one end of the Ethernet cable into the LAN (Passive PoE) port of the device and the other
end to the PoE port on the PoE Injector.
(3) Connect the power cord with the PoE Injector and plug the other end into an elec
(4) Connect the second Ethernet cable into the LAN port of the PoE Injector and the other end to the
Ethernet port on the computer.
Figure
Step 2. Attach the antennas onto the antenna connectors of the device and place the bottom cover back into
the device to finish the installation
Figure 2
User Manual of WAP
-17-
according to the following Steps. Don't forget to pull out the power plug and keep your
connection:
cover.
Connect one end of the Ethernet cable into the LAN (Passive PoE) port of the device and the other
end to the PoE port on the PoE Injector.
Connect the power cord with the PoE Injector and plug the other end into an elec
Connect the second Ethernet cable into the LAN port of the PoE Injector and the other end to the
Ethernet port on the computer.
Figure 2-1 PoE and LAN port connection
onto the antenna connectors of the device and place the bottom cover back into
nstallation.
2-2 Finish installation and connect to antennas
WAP-500N/WBS-500N
s. Don't forget to pull out the power plug and keep your
Connect one end of the Ethernet cable into the LAN (Passive PoE) port of the device and the other
Connect the power cord with the PoE Injector and plug the other end into an electrical outlet.
Connect the second Ethernet cable into the LAN port of the PoE Injector and the other end to the
onto the antenna connectors of the device and place the bottom cover back into