Planet WAP-500N, Руководство пользователя

Страница: 37 / 78

User Manual of WAP-500N/WBS-500N
-36-
The page includes the following common settings in each Internet Connection Type:
Object Description
•
Internet Connection Type
•
DHCP: Dynamic IP addressing assigns a different IP address each
time a device connects to an ISP service provider.
•
Static IP: Setting a static IP address allows an administrator to set a
specific IP address for the router and guarantees that it cannot be
assigned a different address.
•
PPPoE: Point-to-Point Protocol over Ethernet (PPPoE) is used mainly
by ISPs that provide DSL modems to connect to the Internet.
•
PPTP: The Point-to-Point Tunneling Protocol (PPTP) is used in
association with virtual private networks (VPNs).
Option: This section may vary depending on the Internet Connection Type.
Refer to settings of each corresponding section from 5.4.2.1 to 5.4.2.4
Domain Name Server (DNS) Address
•
Get Automatically From ISP Select it to obtain the DNS automatically from the DHCP server.
•
Use These DNS Servers
Select it to set up the Primary DNS and Secondary DNS servers
manually.
•
Primary DNS
Enter the primary DNS server address.
•
Secondary DNS
Enter the secondary DNS server address.
WAN Ping
•
Discard Ping on WAN
Check it to enable pings on the WAN interface or disable to block pings on
the WAN interface.
•
Accept
Click Accept to apply the setting.
•
Cancel
Click Cancel to cancel the setting.
4.4.2.1.
DHCP
Select DHCP and the device will automatically obtain IP addresses, subnet masks and gateway addresses from
the ISP.