Planet WAP-2000, Руководство пользователя, Страница: 9 / 35

-5-
2-3 Mechanical Description
Top panel of the Access Point:
The following table provides an overview of each LED activity:
LED Definition Activity Description
PWR Continuous Green Power enabled
AP Continuous Green The Access Point is ready in service.
Off: No wireless activity
WLAN Flashing Green
Flashing: Wireless RX/TX activity
Off: No Ethernet traffic activity
LAN Flashing Green
Flashing: Wired LAN traffic activity
Off: no station connected to the Access Point
LINK Continuous Green
On: with one or more stations associated to the
Access Point
Back panel of the Access Point:
Power Socket
The power adapter plugs into the socket labeled “POWER”.
Ethernet Ports
The 11Mbps Wireless LAN Access Point supports two types of Ethernet ports: RJ-45 MDI
daisy-chain port (labeled “MDI”) and RJ-45 MDI-X station port (labeled “MDI-X”). To
connect the Access Point to a hub, use the MDI port; to connect the Access Point to a
computer/station, use the MDI-X port. Both connection ports are used with a straight-
through UTP cable. Please note that, these two RJ-45 ports cannot be used at the same time .
The four LEDs (100M/Link/Tx/Rx) next to the Ethernet ports indicate the Ethernet physical
link status. The ‘Link’ LED is a good indicator for to see if you have proper Ethernet
connection.
POWER MDI MDI-X RS-232
Link
OR
RX
100M TX