Planet WAP-2000, Руководство пользователя, Страница: 18 / 35

-14-
With the Access Control Table enabled, you can authorize wireless units to access the Access
Point by identifying the MAC address of the wireless devices that are allowed access to
transmit data. To create or edit the Access Control Table, do the following:
Go to the Access Control tab and select “Enable Access Control”. Note that when you
enable the Access Control Table without any MAC address in the table, no access is allowed
to communicate with the Access Point.
Use the following buttons to manage the Access Control Table:
Add – to enter MAC addresses of authorized wireless devices one at a time.
Edit – to change the entries in the table if you enter the incorrect MAC address.
Remove – to remove MAC addresses one at a time.
Clear – to remove all MAC addresses in the table.
Import – to import an existing Access Control Table.
Export – to save the current Access Control Table to a location on your computer.
* You can save the file as a text document.