25
AP-Client Only Mode
In this mode the WATA is used to access the Wireless Service Provider network by connecting
wirelessly to the remote (Outdoor AP). The user can access the PSTN network by connecting to the
FXS ports or accessing the internet by connecting the PCs to the 2 Ethernet ports.
WLAN Mode
For wireless connected type 802.11 B/G mixed/ 802.11b only /
802.11G only
Remote AP SSID
Define the same as your Wireless Router uses.
Remote AP KEY
Enter the remote AP Authorization Key (WPA-PSK / WPA2-PSK /
WPAPSK ,WPA2PSK Mix Mode to Show)
W-LAN Channel
Define the same as your Wireless Router uses.
W-LAN IP Assignment
1. DHCP client
2. Static IP Address
When WATA operate in AP-Client Mode, the WAN and LAN RJ-45
interface will be configured as a 2 port switch for connecting
with 2 PCs for access wireless network
Í
Note
