36
Enable
Enable / Disable the port trigger, default setting is Disable
Trigger Port
This is the port used to trigger the application. It can be either a single port
or a range of ports
Trigger Type
This is the protocol used to trigger the special application
Public Port
This is the port number on the WAN side that will be used to access the
application. You may define a single port or a range of ports. You can use a
comma to add multiple ports or port ranges.
Public Type
This is the protocol used for the special application.
Action
Insert a new Port Trigger or update a specified Port Trigger.
Packet Filter
Controlling access to a network by analyzing the incoming packets and letting they pass or halting them
based on the IP addresses of the source.
(Can be useful for residential screening as well – for parental screening or other)
