Planet POE-100, Руководство пользователя

Страница: 11 / 19

8 9
Hint:
Please check the power requirement of the
device that is going to get power from POE-
100S. If the power requirement is higher than
POE-100/100S can supply, it will shutdown the
POE-100S. This shall shutdown your device as
well.
POE-100 and POE-100S should being installed in pair, use of
third-party device could damage your device or use of only
one device at a time could damage your device.
4.2 POE-100 – the injector installation
1. Connect a standard network cable from Hub/Switch to
Ethernet port of POE-100.
2. Connect the long cable that will be used to connect to
the remote device to the port EDC .
3. In the other end of the cable, place the warning paster
to the RJ-45 end.
Hint:
This warning paster is used to warn the us-
ers if they are going to make change of the
cable.
Figure 3: Warning paster location
4. Connect the AC adapter to “15V DC” of POE-100. The
power LED will be steady on.
PWR
Power over Ethernet Injector
POE-100
SWITCH
Paster