background image

Copyright

Copyright (C) 2004 PLANET Technology Corp. All rights 

reserved. 

The  products  and  programs  described  in  this  User’s 

Manual  are  licensed  products  of  PLANET  Technology, 

This  User’s  Manual  contains  proprietary  information 

protected by copyright, and this User’s Manual and all 

accompanying hardware, software, and documentation 

are copyrighted. 

No  part  of  this  User’s  Manual  may  be  copied,  photo-

copied, reproduced, translated, or reduced to any elec-

tronic medium or machine-readable form by any means 

by  electronic  or  mechanical.  Including  photocopying, 

recording, or information storage and retrieval systems, 

for  any  purpose  other  than  the  purchaser’s  personal 

use, and without the prior express written permission of 

PLANET Technology.

Disclaimer

PLANET Technology does not warrant that the hardware 

will work properly in all environments and applications, 

and  makes  no  warranty  and  representation,  either 

implied  or  expressed,  with  respect  to  the  quality,  per-

formance,  merchantability,  or  fitness  for  a  particular 

purpose.

PLANET has made every effort to ensure that this User’s 

Manual  is  accurate;  PLANET  disclaims  liability  for  any 

inaccuracies or omissions that may have occurred.

Information  in  this  User’s  Manual  is  subject  to  change 

without notice and does not represent a commitment on 

the  part  of  PLANET.  PLANET  assumes  no  responsibility 

for any inaccuracies that may be contained in this User’s 

Manual.  PLANET  makes  no  commitment  to  update  or 

keep current the information in this User’s Manual, and 

reserves the right to make improvements to this User’s 

Manual and/or to the products described in this User’s 

Manual, at any time without notice.

If you find information in this manual that is incorrect, 

misleading,  or  incomplete,  we  would  appreciate  your 

comments and suggestions.

Содержание POE-100




















Отзывы: