Planet GS-4210-16P2S Скачать руководство пользователя страница 357

Страница: 357 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

357

The page includes the following fields:

Object

Description

•

Interface

The switch port number of the logical port.

•

Toltal (Bytes)

Total number of bytes of LLDP information that is normally sent in a packet.

•

Left to Send (Bytes)

Total number of available bytes that can also send LLDP information in a packet.

•

Status

Gives the status of the TLVs.

•

Mandatory TLVs

Displays if the mandatory group of TLVs were transmitted or overloaded.

•

MED Capabilites

Displays if the capabilities packets were transmitted or overloaded.

•

MED Location

Displays if the location packets were transmitted or overloaded.

•

MED Network Policy

Displays if the network policies packets were transmitted or overloaded.

•

MED Extended Power
via MDI

Displays if the extended power via MDI packets were transmitted or overloaded.

•

802.3 TLVs

Displays if the 802.3 TLVs were transmitted or overloaded.

•

Optional TLVs

If the LLDP MED extended power via MDI packets were sent, or if they were
overloaded.

•

MED Inventory

Displays if the mandatory group of TLVs was transmitted or overloaded.

•

802.1 TLVs

Displays if the 802.1 TLVs were transmitted or overloaded.

4.12.9 LLDP Statistics

Use the LLDP Device Statistics screen to general statistics for LLDP-capable devices attached to the switch, and for LLDP

protocol messages transmitted or received on all local interfaces. The LLDP Global and Port Statistics screens in

Figure 4-12-25

and

Figure 4-12-26

appear.

Figure 4-12-25:

LLDP Global Statistics Page Screenshot

Содержание GS-4210-16P2S
















































































































































































































































































































































































































































Результаты поиска

Содержание GS-4210-16P2S

Отзывы:

Planet GS-4210-16P2S, Руководство пользователя, Страница: 357 / 431

Результаты поиска

Содержание GS-4210-16P2S

Отзывы: