Planet GS-4210-16P2S Скачать руководство пользователя страница 133

Страница: 133 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

133

The page includes the following fields:

Object

Description

•

VLAN ID

Select VLAN ID for this drop down list to assign VLAN membership.

•

Port

The switch port number of the logical port.

•

Interface VLAN Mode

Display the current interface VLAN mode.

•

Membership

Select VLAN membership for each interface by marking the appropriate radio

button for a port or trunk:

Forbidden:

Interface is forbidden from automatically joining the VLAN via

GVRP.

Excluded:

Interface is not a member of the VLAN. Packets associated with

this VLAN will not be transmitted by the interface.

Tagged:

Interface is a member of the VLAN. All packets transmitted by the

port will be tagged, that is, carry a tag and therefore carry VLAN or

CoS information.

Untagged:

Interface is a member of the VLAN. All packets transmitted by the

port will be untagged, that is, not carry a tag and therefore not

carry VLAN or CoS information. Note that an interface must be

assigned to at least one group as an untagged port.

•

PVID

Display the current PVID

Button

: Click to apply changes.

Содержание GS-4210-16P2S
















































































































































































































































































































































































































































Результаты поиска

Содержание GS-4210-16P2S

Отзывы:

Planet GS-4210-16P2S, Руководство пользователя, Страница: 133 / 431

Результаты поиска

Содержание GS-4210-16P2S

Отзывы: