PLANET Technology
GRT-101 User’s Manual
-
8
-
The following table describes the connectors’ functions:
Table 2-2 Connector Functions
Connectors Description
DC-IN
Power adaptor inlet: Input voltage 9VDC
LAN
Ethernet 10BaseT for LAN port (RJ-45)
CONSOLE RS- 232C (DB9) for system configuration and maintained
LINE
SHDSL interface for WAN port (RJ-11)
2.3 Rear Panel Connections
The figure shows the rear panel connections of GRT-101
.
The STU-R is a standalone and can able to place in desktop. All the external
wiring shall be located at the rear panel. The LAN port is a 10 Base-T
auto-sensing and half/full duplex configurable Ethernet interface and complied
with IEEE 802.3u respectively. The console (RS-232C) interface for
configuration are menu-driven operation and can also be configured through
Ethernet interface by Telnet or Web-based operation. The power switch
operated for power on and power off
Figure 2-3 Direct Connection with PC or NB
PC
NB
Wall Jack
Power
Adapte
r
Cross
Over
Ethernet
DB-9
Cable
