PLANET Technology
GRT-101 User’s Manual
-
22
-
Note: See section 3.10 User Profile for more information on how to add, delete, modify, and list user profile.
3.5 Connection Mode
GRT-101 supports two connection modes: bridging and routing. Currently, it
comes pre-configured with routing mode. Note that, routing mode and bridging
mode cannot be used simultaneously.
To let GRT-101 operate in bridging mode, type:
admin# setup mode bridge
To save your changes enter:
admin# write
To enable your changes, reboot the system:
admin# reboot
To set GRT-101 operating in routing mode, enter:
admin# setup mode route
To save your changes enter:
admin# write
To enable your changes, reboot the system:
admin# reboot
3.6 Bridging Mode
Note: This section is for bridging mode operation only.
When GRT-101 operates in bridging mode, it behaves like a wire connecting a
local PC directly to a service provider’s network. Bridge data is encapsulated
using the RFC1483 protocol to enable data transport. GRT-101 currently
supports IEEE 802.1D transparent learning bridge.
3.6.1 Bridge management
You can manage GRT-101 using Telnet either from LAN interface or from
Wide Area Network (WAN) interface. The following procedure shows how to
