background image

 

2

Copyright 

Copyright (C) 2004 PLANET Technology Corp. All rights reserved.   

The products and programs described in this User

s Manual are licensed products of PLANET Technology, This User

Manual contains proprietary information protected by copyright, and this User

s Manual and all accompanying hardware, 

software, and documentation are copyrighted.   

No part of this User

s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium 

or machine-readable form by any means by electronic or mechanical. Including photocopying, recording, or information 

storage and retrieval systems, for any purpose other than the purchaser's personal use, and without the prior express 

written permission of PLANET Technology. 

 
Disclaimer 

PLANET  Technology  does  not  warrant  that  the  hardware  will  work  properly  in  all  environments  and  applications,  and 

makes  no  warranty  and  representation,  either  implied  or  expressed,  with  respect  to  the  quality,  performance, 

merchantability, or fitness for a particular purpose. 

PLANET  has  made  every  effort  to  ensure  that  this  User

s  Manual  is  accurate;  PLANET  disclaims  liability  for  any 

inaccuracies or omissions that may have occurred. 

Information in this User

s Manual is subject to change without notice and does not represent a commitment on the part of 

PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User

s Manual. PLANET 

makes no commitment to update or keep current the information in this User

s Manual, and reserves the right to make 

improvements to this User

s Manual and/or to the products described in this User

s Manual, at any time without notice. 

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and 

suggestions. 

 

Regulatory

 

FCC Certification   

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to 

Part  15  of  the  FCC  rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful 

interference when the equipment is operated in a commercial environment. This equipment generates, uses, 

and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instruction 

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential 

area is likely to cause harmful interference in which case the user will be required to correct the interference a 

the own expense. 

 
CE Mark 

This product is marked with the CE symbol and indicates compliance with all applicable directives.

 

 
Trademarks 

The  PLANET  logo  is  a  trademark  of  PLANET  Technology.  This  documentation  may  refer  to  numerous  hardware  and 

software products by their trade names. In most, if not all cases, their respective companies claim these designations as 

trademarks or registered trademarks. 

Содержание DVR-400


































Отзывы: