Note:
In the Web configuration page, you can click
Apply Changes
to save the settings
temporarily. If you want to save the settings of this page permanently, click
save
of
Attention
that appears at the button of the Web page after the configuration.
3.2 Wizard
The
Wizard
page guides fast and accurate configuration of the Internet connection and
other important parameters. The following sections describe these various configuration
parameters. Whether you configure these parameters or use the default ones, click
NEXT
to enable your Internet connection.
When subscribing to a broadband service, you should be aware of the method by which
you are connected to the Internet. Your physical WAN device can be either PPP, ADSL, or
both. The technical information about the properties of your Internet connection is
provided by your Internet Service Provider (ISP). For example, your ISP should inform
you whether you are connected to the Internet using a static or dynamic IP address, and
the protocol that you use to communicate on the Internet.
In the navigation bar, click
Wizard
. The page shown in the following figure appears.
The following table describes the parameters of this page:
Field
Description
User Name
Choose the user name for accessing the router. You
can choose
admin
or
user
.
New Password
Enter the password to which you want to change the
old password. The password can not contain space
key, %, “, ? or &.
Confirmed Password
Enter the new password again.
24
