Rear Panel of ADW-4401
Rear Panel Port and Button Definition
Connector
Description
POWER Button
The power button is for turn on or turns off the router.
WPS / WLAN
Press 1~2 seconds can enable and disable the wireless function.
Press 5 seconds can enable WPS function of the wireless clients, the router
and clients will automatically configure the security key and connect directly.
Reset
The reset button can restore the default settings of device. To restore factory
defaults, keep the device powered on and push a paper clip into the hole.
Press down the button over 5 seconds and then release.
Power
Power connector with 12V DC, 1.0A
LAN 1-4
Router is successfully connected to a device through the corresponding port
(1, 2, 3, or 4). If the LED is flashing, the Router is actively sending or receiving
data over that port.
Line
The RJ-11 connector allows data communication between the modem and
the ADSL network through a twisted-pair phone wire.
14