Rear Panel of ADE-3410
Rear Panel Port and Button Definition
Connector
Description
POWER Button
The power button is for turn on or turns off the router.
Power
Power connector with 12V DC, 0.5A
Reset
The reset button can restore the default settings of device. To restore
factory defaults, keep the device powered on and push a paper clip into
the hole. Press down the button over 5 seconds and then release.
Ethernet
Router is successfully connected to a device through the Ethernet port. If
the LED is flashing, the Router is actively sending or receiving data over
that port.
USB
Connect the supplied USB cable to this port when connecting to the PC.
Line
The RJ-11 connector allows data communication between the modem and
the ADSL network through a twisted-pair phone wire.
12
