Planet Networking & Communication WGSW-24040 Скачать руководство пользователя страница 63

Страница: 63 / 576

User’s Manual of WGSW-24040 / WGSW-24040R

Client Statistics

Object

Description



Transmit to Client

The packets number that relayed packets from server to client.



Transmit Error

The packets number that error sending packets to servers.



Receive from Client

The packets number that received packets from server.



Receive Agent Option

The packets number that received packets with relay agent information option.



Replace Agent Option

The packets number that replaced received packets with relay agent information

option.



Keep Agent Optin

The packets number that keepped received packets with relay agent information

option.



Drop Agent Option

The packets number that dropped received packets with relay agent information

option.

Buttons

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

: Click to refresh the page immediately.

: Clear all statistics.

4.2.10 CPU Load

This page displays the CPU load, using a SVG graph.

The load is measured as averaged over the last 100ms, 1sec and 10 seconds intervals. The last 120 samles are graphed, and

the last numbers are displayed as text as well.

In order to display the SVG graph, your browser must support the SVG format. Consult the SVG Wiki for more information on

browser support. Specifically, at the time of writing, Microsoft Internet Explorer will need to have a plugin installed to support

SVG. The CPU Load screen in

Figure 4-2-13

appears.

Содержание WGSW-24040

































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSW-24040

Отзывы:

Похожие инструкции для WGSW-24040

Бренды по названию

Популярные бренды

Planet Networking & Communication WGSW-24040, Руководство пользователя

Результаты поиска

Содержание WGSW-24040

Отзывы:

Похожие инструкции для WGSW-24040

Бренды по названию

Популярные бренды