Planet Networking & Communication IGSW-24040T Скачать руководство пользователя страница 99

Страница: 99 / 521

User’s Manual of IGSW-24040T

The page includes the following fields:

Object

Description



Port to mirror to

Frames from ports that have either source or destination mirroring enabled are mirrored

to this port. Disabled disables mirroring.



Switch to mirror to

Frames from ports that have either source (rx) or destination (tx) mirroring enabled are

mirrored to this switch.



Port

The logical port for the settings contained in the same row.

Select mirror mode.

Rx only

: Frames received at this port are mirrored to the mirroring port. Frames

transmitted are not mirrored.

Tx only

Frames transmitted from this port are mirrored to the mirroring port. Frames

received are not mirrored.

Disabled

Neither frames transmitted nor received are mirrored.



Mode

Enabled

Frames received and frames transmitted are mirrored to the mirror port.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-24040T

Отзывы:

Planet Networking & Communication IGSW-24040T, Руководство пользователя, Страница: 99 / 521

Результаты поиска

Содержание IGSW-24040T

Отзывы: