Planet Networking & Communication IGSW-24040T Скачать руководство пользователя страница 266

Страница: 266 / 521

User’s Manual of IGSW-24040T

Configuration

and Port Mode on a given port are enabled, ARP Inspection is enabled on this

given port.

Buttons

: Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

4.12.13 ARP Inspection Static Table

This page provides Static ARP Inspection Table. The Static ARP Inspection Table screen in

Figure 4-12-13

appears.

Figure 4-12-13

Static ARP Inspection TableScreen Page Screenshot

The page includes the following fields:

Object

Description



Delete

Check to delete the entry. It will be deleted during the next save.



Port

The logical port for the settings.



VLAN ID

The VLAN ID for the settings.



MAC Address

Allowed Source MAC address in ARP request packets.



IP Address

Allowed Source IP address in ARP request packets.

Buttons

: Click to add a new entry.

: Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

266

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-24040T

Отзывы:

Planet Networking & Communication IGSW-24040T, Руководство пользователя, Страница: 266 / 521

Результаты поиска

Содержание IGSW-24040T

Отзывы: