Planet Networking & Communication IGSW-24040T Скачать руководство пользователя страница 223

Страница: 223 / 521

User’s Manual of IGSW-24040T



Last ID

The user name (supplicant identity) carried in the most recently received

Response Identity EAPOL frame for EAPOL-based authentication, and the

source MAC address from the most recently received frame from a new client for

MAC-based authentication.



Port VLAN ID

The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID

is not overridden by NAS.

If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is

appended to the VLAN ID. Read more about RADIUS-assigned VLANs here.

If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID.

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-24040T

Отзывы:

Planet Networking & Communication IGSW-24040T, Руководство пользователя, Страница: 223 / 521

Результаты поиска

Содержание IGSW-24040T

Отзывы: