Planet Networking & Communication IGSW-24040T Скачать руководство пользователя страница 211

Страница: 211 / 521

User’s Manual of IGSW-24040T

The page includes the following fields:

Object

Description



Client

The management client for which the configuration below applies.



Authentication Method

Authentication Method can be set to one of the following values:

None

: authentication is disabled and login is not possible.

local

: use the local user database on the switch for authentication.

radius

: use a remote RADIUS server for authentication.

: use a remote server for authentication.



Fallback

Enable fallback to local authentication by checking this box.

If none of the configured authentication servers are alive, the local user database

is used for authentication.

This is only possible if the Authentication Method is set to something else than

'none or 'local'.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

4.11.3 Network Access Server Configuration

This page allows you to configure the IEEE 802.1X and MAC-based authentication system and port settings.

The IEEE 802.1X standard defines a port-based access control procedure that prevents unauthorized access to a network by

requiring users to first submit credentials for authentication. One or more central servers, the backend servers, determine

whether the user is allowed access to the network. These backend (RADIUS) servers are configured on the

"Configuration

→

Security

→

AAA" page. The IEEE802.1X standard defines port-based operation, but non-standard variants

overcome security limitations as shall be explored below.

MAC-based authentication allows for authentication of more than one user on the same port, and doesn't require the user to

have special 802.1X supplicant software installed on his system. The switch uses the user's MAC address to authenticate

against the backend server. Intruders can create counterfeit MAC addresses, which makes MAC-based authentication less

secure than 802.1X authentication. The NAS configuration consists of two sections, a system- and a port-wide. The Network

Access Server Configuration screen in

Figure 4-11-4

appears.

211

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-24040T

Отзывы:

Planet Networking & Communication IGSW-24040T, Руководство пользователя, Страница: 211 / 521

Результаты поиска

Содержание IGSW-24040T

Отзывы: