User’s Manual of IGS-2x00T Serial Device Server Series
55
The range of value is from 0 to FF. The default is
disable.
•
Separator Process
Separators are ASCII characters specified by the user when configuring the serial serve.
This parameter describes how to control characters received on a serial port are sent
across the network. The default is
Do nothing.
Do nothing
: it will pack the accumulated data including Separators.
Strip Separator
: it controls striping of Separator from the received characters
before the received characters are sent to the network.
•
Separator Time Out
Separator timeout controls the maximum amount of time that can be used to buffer
characters before the characters are sent to the network. A smaller values will increase
the number of network packets, but reduce the amount of time to receive characters, on
the contrary, Larger values reduce the number of network packets, but increase the
amount of time to receive characters. The range of value is from 0 to 65535 ms. The
default is
0 ms.
Connection Target IP address
Object
Description
•
Target IP address 1
through 4
IP addresses are used to deliver packets of data across a network and have what is
termed end-to-end significance. The network data is sent to the device in a first-in,
first-out (FIFO) method. During data transfer phase, data is transmitted sequentially
through established path-arriving at the destination in the order in which it was sent.
