User’s Manual of IGS-2x00T Serial Device Server Series
18
2.1.4 Wiring the Power Inputs
The upper panel of the Industrial Serial Server indicates a DC inlet power socket and consists of one terminal block connector
within 6 contacts. Please follow the steps below to insert the power wire.
1. Insert positive/negative DC power wires into
Contacts 1 and 2
for
Power 1
, or
Contacts 5 and 6
for
Power 2
. Figure 2-1-3
and 2-1-4 show PWR1 and PWR2 of the Industrial Serial Server.
ICS-2200T
: 12~48V DC
Figure 2-1-3
ICS-2200T Upper Panel
ICS-2400T
: 12~48V DC
Figure 2-1-4 ICS-2400T Upper Panel
2. Tighten the wire-clamp screws for preventing the wires from loosening.
1
2
3
4
5
6
V1+
V1-
V2+
V2-
Power 1
Fault
Power 2
Figure 3-3
PWR1 & PWR2 pin of terminal block.
