Planar VM Series, Руководство пользователя

Страница: 53 / 75

Operating the Display
Planar VM Series User Manual
020-1357-01D
Page | 53
HDMI CEC

Enable the HDMI CEC functionality.

Note: Only the commands listed in the table below are implemented. Sources that
require other commands may encounter compatibility issues. It is recommended to leave
CEC disabled unless all CEC commands from the source are implemented.
Supported HDMI CEC Commands
Command Value Notes
Text View On 0x0D
Standby 0x36
User Control Pressed 0x44 Power key only (Data value 0x40)
Active Source
0x82
Give Device Power Status
0x8F

Options: Off, On

Default: Off
Auto Scan Sources

Select to scan inputs in order until a valid signal is detected. Continue scanning when
the signal on the selected input is lost.

Options: Off, On

Default: Off
Standby Mode

Select the behavior of the display in standby mode.

Options: Lower Power, Fast Startup

Default: Low Power