background image

 

 

 

iii

Important Safety Instructions 

Please read the following instructions carefully.  This manual should be retained 
for future use. 

1.  To clean the LCD Monitor screen, first, make sure the Monitor is in the 

power off mode.  Unplug the Monitor from its power source before cleaning 
it.  Do not spray liquid cleaners directly onto the unit.  Stand away from the 
LCD Monitor and spray cleaning solution onto a rag.  Without applying 
excessive pressure, clean the screen with the slightly dampened rag. 

2.  Do not place your LCD Monitor near a window.  Exposing the Monitor to 

rain, water, moisture or sunlight can severely damage it. 

3.  Do not place anything on top of the Monitor-to-PC signal cord.  Make sure 

the cord is placed in an area where it will not be stepped on. 

4.  Do not apply pressure to the LCD screen.  Excessive pressure may cause 

permanent damage to the display. 

5.  Do not remove the cover or attempt to service this unit by yourself.  You 

may void the warranty.  Servicing of any nature should be performed only 
by an authorized technician.  

6.  Safe storage of the LCD Monitor is in a range of -20°C to +60°C (-4°F ~ 

140°F).  Storing your LCD Monitor outside this range could result in 
permanent damage. 

7.  If any of the following occurs, immediately unplug your Monitor and call an 

authorized technician. 

• 

The power or Monitor-to-PC signal cord is frayed or damaged. 

• 

Liquid has been spilled onto the Monitor, or it has been exposed to rain. 

• 

The Monitor has been dropped or the case has been damaged. 

8.  Only with use of supplied adaptor, in case of loss or replacement contact the 

retailer or service center. 

Содержание PE191M





























Отзывы: