Planar IT-081, Руководство по эксплуатации

Страница: 26 / 31

Figure 4.24
The following parameters in the table are available for editing:
1. Theme . Selecting of the colors for the user interface elements.
2. Key sound . Setting of the key pressing sound or turning the sound off.
3. Volume . Adjusting of the audio indication volume.
4. Date . Setting of the date.
5. Time . Setting of the time.
6. Clock adjustment . Adjusting of the clock.
7. Auto power off . Setting of the mode of the Meter automatic switching off.
8. Auto backlight off . Setting of the automatic backlight switching off mode.
9. Quick start . Setting of the Meter switching on.
You can select the parameters using and arrows, and set their values by ◄ and
► keys.
Auto power off parameter allows the user to set the automatic Meter power
switching off after the selected time interval from the moment of the last pressing of any
key.
Auto backlight off parameter is for setting of automatic decreasing of the LCD
backlight brightness after the selected time interval from the moment of the last pressing of
any key. This mode allows saving the battery energy.
Quick start parameter is for selecting the mode of the Meter switching on. If the
parameter value is off , the Main menu appears on the screen after the Meter is switched
on. If the parameter value is on, then the last previously used measurement mode
appears on the screen after the Meter is switched on.
4.5.4. Identification Data Readout
Identification data readout program is intended for determining the serial numbers of
the modules of the Meter, their modifications and software versions. The icon in the
main menu corresponds to this mode. The screen views are shown in the figure 4.25:
Figure 4.25
You can switch between the information screens for the Base Unit and Removable
Module using ◄ and ► keys.
26