Planar IT-081, Руководство по эксплуатации

Страница: 22 / 31

Figure 4.18
To create a page, it is necessary to enter its name, select the channel and limit plans,
and select the input attenuator mode.
4.4.5. Spectrum Data Logger
4.4.5.1.
4.4.5.2.
General Information
Spectrum data logger is intended for measuring the signal spectrum in the defined
frequency band and recording the measurement results to the Meter memory with date
and time thereof. Spectrum data logger allows viewing the measurement results and
uploading the data to your PC for further processing and report preparation.
List of Spectrum Data Logger Pages
This mode allows performing all the operations with the spectrum data logger pages:
viewing, deleting and creating of a new page. See the screen views in the figure 4.19.
Figure 4.19
The screens show the list of spectrum data logger pages. For each page the
following information is presented: status, page name, date and time of updating, and
frequency scanning range.
Press F1 to open the pop-up menu with the list of available commands:
1. Graph . Viewing of the selected page.
2. Delete . Deleting of the selected page.
Press F2/Add to add a new page, press F3/Run to start the page scanning
(measurement), and press F4/Sort to select the page sorting type (by the date of the last
updating, by status or by the page name) in the table.
The status sign shows the page state:
Grey indicator Page created, but not scanned;
Green indicator Page scanned.
4.4.5.3. Creating New Spectrum Data Logger Page
To create a new spectrum data logger page, first press
F2 key. Parameter selection
screen will appear (figure 4.20). It is necessary to enter the page name, the scan limits,
attenuation value, and the type of the saved trace.
22