Planar IT-081, Руководство по эксплуатации, Страница: 21 / 31

4.4.4.3. Viewing and Checking Channel Data Logger Page
When viewing the contents of a channel data logger page, the data table has the
same view as in the figure 4.16. The table contains the channel number, name and
frequency, and also the measured parameters. If any errors are found in the channel
parameter values, this channel number will be shown against the red background.
If the current channel is digital, the dig value will be shown in V/A parameter field.
Dashes in the value field mean that this parameter measurement is not measured for this
type of channel. Empty field means that this parameter measurement is turned off in the
channel plan.
Figure 4.16
The following commands can be accessed by the functional keys:
1. Info . Select by F1 . Viewing of the detailed channel data.
2. Graph . Select by F2 . Viewing of the table in Scan mode.
3. Run . Select by F3 . Scanning of the channel data logger page.
To identify the errors after the limit test, open the table of the detailed channel data
( F1 key). The test parameter table will appear on the screen (figure 4.17).
Figure 4.17
In this table you can see the parameters for the measured data to be verified with
according to the limit plan, and also the measured parameters. The parameter value field
is highlighted in red if it failed the limit test. The value will not be shown in case the
parameter is disabled for measurement in channel plan. The limit fields will show OFF if
the parameter is disabled in limit test.
Using ◄ and ► keys you can scroll through the channels without exiting the test
parameter table. To switch between the channels with errors, use F2 and F3 keys.
4.4.4.4.
4.4.4.5.
Deleting Channel Data Logger Page
To delete a channel data logger page, select Delete command in the pop-up menu.
The confirmation request screen will appear. After confirmation the page will be deleted
from the Meter memory.
Creating New Channel Data Logger Page
To create a new channel data logger page, press F2 . The page creation window will
appear on the screen (see figure 4.18).
21