18 | Dome E4c Display
Desktop stand
Unfasten the stand lock when necessary to adjust display height.
Move the lever to the left to unlock the stand column.
Remove the stand cable cover to thread the power cord and DVI
cable to the display. Press the PUSH button above the USB hub then
pull the cover down and out to remove it. Thread the DVI cable and
the power cord through the back of the stand. Make sure the cable
and cord are seated in the notches. To reattach the stand cover, align
the hooks with the slots on the stand. Press the cover into place. A
click sound signals a secure connection.
Use the integrated, bus-powered USB hub to attach USB devices
to the display instead of the computer. To activate the USB hub
function, the display must be connected to a USB-compliant
computer or another hub with a USB cable. Even if the display is in
power-saving mode, the USB devices function when connected to
the USB ports on the stand.
Lock lever
Stand cable cover
USB hub
PUSH button
Display desktop stand
mx4.book Page 18 Wednesday, August 9, 2006 3:03 PM
