4 Clean Pole Installation and User’s Guide (OM720-02)
OPERATOR’S SAFETY SUMMARY
Safety Summary
When using your Clean Pole Power System, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons, including the
following:
Read Instructions
Read and follow all safety and operating instructions.
Use the Proper Power Source
Operate only from the type of power source indicated on the rating label. To disconnect from
the power source, remove the power cord. This product is intended to run from a power
source supplying not more than 120 VAC RMS between the supply conductors, or between
supply conductor and ground. Refer to Service Safety Summary for battery replacement
information.
Grounding
This unit is Class II (double insulated), and is provided with a 3-wire grounding type power
cord.
Power Cord
Use only the power cord and connector that is specified for your product and that is in good
condition. Refer cord and connector changes to qualified service personnel. When the cord is
not in use, remove to avoid damage.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Do Not Remove Covers or Panels
Product covers and panels provide significant protection against electrical shock and heat
sources that may cause burns. Do not operate the product with covers removed.
Dispose of Batteries Safely
Federal law requires that Lead Acid batteries be disposed of in a safe and ecologically sound
fashion. If in doubt as to how to accomplish this please contact your state government or
Planar Systems for assistance.
Ventilation
Avoid overheating by keeping slots and openings unblocked.
