Clean Pole Installation and User’s Guide (OM720-02) 9
Mount the work surface to the wheeled base.
Four bolts go in from two sides and must be tightened as tight as you can with a 4 inch allen
wrench.
Mount the Clean Screen computer
mounting bolts
mounting bolts
Attach the Clean Screen head to the tilting plate on the worksurface with four 10-32" x ½" Phillips
pan head screws. Adjust the tilting plate by pulling out on the tightening lever and turning it until
it is positioned so you can rotate it clockwise to tighten. Release the pull force and turn the lever
like a wrench
