6 Clean Pole Installation and User’s Guide (OM720-02)
ASSEMBLY INSTRUCTIONS
Introduction
The Clean Pole is a product designed to be used with the Clean Screen computer workstation.
Be aware of a compressed spring in the central column of the pole which balances the weight
of the steel worksurface, the Clean Screen computer and its input devices. Without the weight
of these items the spring can extend upward with formidable force. There is a pedal at the
bottom of the pole that allows the spring to extend or be compressed.
These instructions apply to both models
M4POLE-PS:
FOUR-WHEELED CLEAN POLE with Rechargeable Power
M4POLE-NPS:
FOUR-WHEELED CLEAN POLE with the AC converter brick
Unpacking and Assembly Instructions
Disassembly is accomplished by reversing this sequence
Tools Needed
To assemble the Clean Pole, you will need a 9/16” (13mm) wrench to remove six bolts from
the packing carton. You will then use 5/32” (4mm) allen wrench to insert four bolts holding
the upper worksurface to the pole column. Then mount the computer with four Phillips head
bolts.
Unpack the Clean Pole
Step 1. Open the box.
Pad box
Worksurface box
Open the top of the box and remove the Pad box and the Worksurface box. (The power
supply has been removed in this picture for clarity.)
