Plaisio Q-CONNECT QCD11, Руководство пользователя, Страница: 36 / 59

User’s guide
36
Note: Before adjusting the feeder, you should unlock the tightening
screw. After adjustment, you must lock the tightening screw in order to
keep the feeder in right position.
4. How to replace the wearing parts
I. When the resistance slice is seriously worn, it must be replaced .Draw
out the banknote feeder, press down the banknote sliding board and
replace the worn resistance slice with a new one or change to another
rubber wearing side.
II. Rubdown banknote twiddling gear can cause unsmooth banknote
feeding or inaccurate banknote counting, so it must be replaced. Draw
out the banknote feeder, remove both the left and right plastic side
covers and replace the worn gear wheel with a new one.
III. The fuse can be replaced if it is burned ‐ out. Open the cover of fuse
holder and insert a new one. Then re ‐ cover it.