Plaisio Q-CONNECT QCD11, Руководство пользователя

Страница: 28 / 59

User’s guide
28
BASIC FUNCTION
1. Place the device in a safe place away from strong electromagnetic
field and sunshine. Then plug the electric socket into 220V AC electric
source and the external display into the corresponding interface on the
back of the device.
2. Turn on the switch. The unit displays first the software version, then
performs a system self ‐ test. If the test is successful, on the counting
window is displayed the “0” indication. If other symbols are displayed,
refer to the chapter “Troubleshooting” of user’s guide .
3. In order to avoid error inspection, the following banknotes must be
eliminated before counting:
I. Banknotes mended with white paper
II. Washed banknotes
III. Seriously contaminated banknotes
IV. Damaged or torn banknotes
4. Quick counting
When you want only to count the banknotes without detecting the
counterfeit ones, turn on the power and turn off all the functions of
counterfeit detection. Then, take a pile of banknotes of the same value
and put them in the feeder in a certain pitch (as shown in figure 1). The
device will count the banknotes automatically. When all the banknotes
of the feeder are transported to the holder, the displayed number on the
counting window shows the quantity of the banknotes. Before each
count, the displayed number is cleared and then the new count starts.
5. Correct operation methods for banknotes counting
Before counting the banknotes, you must first set them in order.
Separate the banknotes depending on their value, eliminate
contamination and paper stuck and then put them into a certain slope.
The tightened bundles of banknotes must be loose before putting them
into slope. Then, put the banknotes on the entrance of the feeder.