Plaisio Q-CONNECT QCD11, Руководство пользователя, Страница: 32 / 59

User’s guide
32
window is the total pieces that have been counted.
Banknote width detection
If banknotes of smaller width are mixed in a pile of banknotes, the unit
will stop when finding out the narrower one. The buzzer will beep and
the “F ‐ P” or “ED” indication will be displayed on the preset display
window. The top banknote on the banknote holder is the one of
narrower width. The smallest width that can be identified is 3mm, which
can be adjusted to 8mm, if necessary. The banknote width detection
precision set by the factory is 5mm. In value ‐ counting mode and mixed ‐
counting mode, width detection function is not available.
Setup detecting sensitivity
1. Press “BAT” key and turn on the unit. The following codes will be
displayed on the display window:
Preset Display Window Counting Display
Window
Description
JD ‐ ‐ 4 ‐ Width precision
JF ‐ ‐ 4 ‐ UV sensitivity
JC ‐ ‐ 2 ‐ MG/MT sensitivity
JS ‐ ‐ 4 ‐ Color sensitivity
JI ‐ ‐ 0 ‐ IR sensitivity
JP ‐ ‐ 4 ‐ Paper sensitivity
2. The displayed parameter on the preset window is the current one.
Press “ADD” to increase and “BAT” to decrease it. Press “+1” to increase
the value and “CUR” to decrease it. After setting all data correctly, press
“RESET” to save the parameter.
3. Setting default parameter
Press the “CHK” button and turn on the machine, the counting display
window shows “DEF”, the preset display window shows “ ‐ H ‐ “. Press
“RESET” button to save the parameter and exit, this operation resumes
all running parameters to factory setting.