Instruction Manual
DM04
1
Device description
The devices of the DM04 series from PKP, is a non-contact flow sensor. The measurement is performed us-
ing magnetic induction and works without any moving parts.
The DM04 is used for measuring or metering water and aqueous solutions. The compact design and inde-
pendence from the intake and discharge sections allows the DM04 to be used under a variety of conditions.
Versions:
The DM04 is available in nominal sizes DN 7, DN 10 and DN 20.
The versions can be configured differently.
Type plate:
The type plate sticker is located at the bottom side of the DM04.
It contains the most important data, the connection diagram and the ar-
row for the flow direction.
1.1 Delivery, unpacking and accessories
All units have been carefully checked for their operational reliability before shipment.
Immediately after receipt, please check the outer packaging for damages or any signs of improper hand-
ling.
Report any possible damages to the forwarder and your responsible sales representative. In such a
case, state a description of the defect, the type and the serial number of the device.
Report any in-transit damage immediately. Damage reported at a later date shall not be recognized.
Unpacking:
Carefully unpack the unit to prevent any damage.
Check the completeness of the delivery based on the delivery note.
Scope of delivery:
1x DM04 as ordered.
1x Operating manual.
1x Packaging.
- 3 -
PKP Prozessmesstechnik • 08/2019
