Instruction Manual
DM04
5.1 Wirings
Pinout:
The pinout differs according to the chosen configuration of the device.
M12x1
Possible pinout:
Pin 1:
+U
B
Pin 2: n. c. (not connected) / Analogue U/I
Pin 3:
GND
Pin 4: Frequency
Pin 5: n. c. (not connected) / d. n. c. (do not connect)
Connect the connecting cable according to your version and the pinout on the type plate.
Supply voltage:
DM04 with frequency output:
Push-Pull:
NPN Open Collector:
PNP Open Collector:
*1: Push-Pull switching outputs of several DM04 may not be connected in parallel.
*2: Recommendation Pull-Up / Pull-Down resistance R
L
~5 kΩ
Use of frequency and analogue output
Push-Pull:
NPN Open Collector:
PNP Open Collector:
Recommendation for resistance R
L
~5 kΩ
- 10 -
PKP Prozessmesstechnik • 08/2019
