28
Levelling
1.
Allow adequate distance to the floor to avoid vibrations and noise.
2.
If the appliance does not stand horizontally, adjust the front feet by turning
them clockwise/anticlockwise until the appliance is level.
Do not put any blankets or
ropes or piles of items on the
floor. They could generate
heat so that the appliance will
not properly work.
Installation of the exhaust hose
The air vent is on the back of the
appliance.
Fix the exhaust hose by pulling the ring
nut (A) from the air vent. Then screw it
on the hose and push it to its proper
position.
If the hose is long and the room temperature low,
some condensate may occur inside the hose. This is a
normal. To avoid that water remains inside the hose or
flows back into the appliance drill a small hole
(diameter 3 mm) into the hose (at its lowest point) and
place a small container there (B).
When you have installed the appliance lead the hose to the air outlet you desire.
Do not bend the hose more than twice. You will find all of the equipment and
information you need to build the air outlet at your hardware store if you want to
lead the hose to a solid grid in a wall or a window.
