43
5.
Remove the big pieces of ice first.
6.
Afterwards remove the small pieces of ice.
7.
Wipe and dry the appliance and door seals with dry and soft cloths.
8.
After cleaning leave the door open for some time to ventilate the appliance.
Replacing of the illuminant
1.
Switch off the appliance and
disconnect it from the mains before
you replace the illuminant.
2.
Squeeze the tabs on the sides of the
lamp cover and remove it..
3.
Take out the old illuminant.
4.
Replace it by a new one (max. 10W).
5.
Reinstall the cover. Wait 5 minutes
before you connect the appliance to the
mains again.
According to the EU regulation No. 244/2009 for the implementation of
the EU directive 2005/32/EG, your appliance is classified as a household
appliance in accordance with the ecodesign requirements for non-
directional household lamps. This means that bulbs, which are used in
household appliances, must not be used to illuminate domestic
establishments.
Replacing of the power cord
DANGER!
The power cord must be replaced
by a qualified and authorized professional only.
9. DECOMMISSIONING
WARNING
If you decommission your appliance temporarily, ensure that children
cannot get into the appliance. Strictly observe the corresponding safety
instructions numbers. 1 and 4, chapter Decommissioning, ultimate.
Decommissioning, temporarily
If the appliance is not used for a longer period of time:
1.
Draw the plug out of the socket.
2.
Remove all food stored in the appliance.
3.
Dry the inside of the appliance with a cloth and leave the door open for a
